Changes
/* PCI Settings */
* '''Maximum Payload''': Set maximum payload of PCI Express device or allow system BIOS to select the value automatically.
* '''Maximum Read Request''': Set maximum read request size of PCI Express device or allow system BIOS to select the value automatically.
* '''ASPM Support''': Set the ASPM (Active State Power Management) level:
** Force L0s - force all links to L0s state
** Auto - BIOS auto configure
** Disable - disables ASPM
* '''Extended Synch''': TBDIf enabled allows generation of extended synchronization patterns.* '''Link Training Retry''': TBDDefines number of retry attempts SW will take to retrain the link if previous attempt was unsuccessful.* '''Link Training Timeout (uS)''': TBDDefines number of microseconds SW will wait before polling "Link Training" bit in link status register. Value range 10-10000 us.* '''Restore PCIE Registers''': On non-PCI Express aware OS's (Pre Windows Vista) some devices may not be correctly reinitialized after S3 (sleep state). Enabling this restores PCI Express device configurations on S3 resume. Warning: TBDEnabling this may cause issues with other HW after S3 resume.
==== Power Settings ====
