Changes
/* 4. fitlet2 BIOS reset */
#Unplug power cable from the fitlet2
#Remove the 4x Phillips Chassis screws
#Remove and bottom and top cover
#Remove the RAM stick
#Plug in power cable (should turn on automatically)- ~ , and Wait ~10 seconds
#Unplug power cable
#Assemble back the RAM stick
9. Plug power cable (should be automatically turned on)
#Plug power cable (should turn on automatically)
#Continue steps for revision 1.1 (RTC battery had to be disconnected):
##Plug the RTC Battery back in
##Plug Power cable
</div>
At this stage the BIOS settings should be reset to defaults.