Difference between revisions of "Fitlet2 FACET Cards"

From fit-PC wiki
Jump to: navigation, search
(FC-SCG)   (change visibility)
(Hardware)   (change visibility)
Line 196: Line 196:
  
 
===Hardware===
 
===Hardware===
* [[FSCG RS232/RS484 pinout table]]
+
* [[FSCG RS232/RS485 pinout table]]
  
 
===Application notes===
 
===Application notes===

Revision as of 00:02, 16 April 2020

  • This page provides technical information about fitlet2 FACET-Cards.
  • FACET-Cards extend fitlet2 functionality and I/O.
  • FACET-Card stands for Function And Connectivity Extension T-Card
  • FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
  • The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs

Custom FACET-Card design resources

Mechanical constraints

There are two form-factors of FACET-Cards

  • Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
  • Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)

Narrow FACET-Card mechanical constraints

Wide FACET-Card mechanical constraints

FACET-Card pinout

FC-PCI fitlet2 FACET Pinout description table

FC-PCI

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


Fc-pci-top.jpg Fc-pci-bottom.jpg

Specifications

  • M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Mini PCI connector - usually used for Cell modem module
  • Micro-SIM card socket

Instructions

Hardware

Production files

FC-CEM

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 B-Key socket + SIM socket (for M.2 cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


FC-CEM-top.jpg FC-CEM-bottom.jpg

Specifications

  • M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • M.2 Key-B: 2230 - usually used for Cell modem module
  • Micro-SIM card socket

Instructions

Production files


FC-USB

fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
Fc-usb-top.jpg Fc-usb-bottom.jpg

Specifications

  • Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
  • The USB port supports in single transaction translator (TT)
  • port current limit - Up to 0.5A

Instructions

Production files


FC-M2LAN

FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.

Specifications

  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Proxy: ECMA-393 and Windows logo for proxy offload
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers
    • Four Software Definable Pins (SDPs)
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.


FC-M2LAN-top.jpg FC-M2LAN-bottom.jpg

Instructions

Production files


FC-SCG

Includes the following socket:

  • M.2 E-key 2230 (usually used for WiFi adapter)


Fc-scg-top.jpg Fc-scg-bottom.jpg

Specifications

  • TBD

Instructions

Hardware

Application notes

Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously

Production files

Mechanical

FC-POED

  • Type: Wide FACET Card
  • Features:
    • 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD

FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
Fc-poed-top-front.jpg Fc-poed-bottom-front.jpg

Specifications

  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Proxy: ECMA-393 and Windows logo for proxy offload
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers
    • Four Software Definable Pins (SDPs)
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.
    • IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
  • Inrush current limit (200-mA) during startup
  • Enhanced features includes automatic Maintain Power Signature (MPS)

Instructions

Production files

FC-OPLN

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD
    • SFP+ socket for optical GbE connection.


Fc-opln-bottom.jpg Fc-opln-top.jpg

Specifications

  • Supported 1Gbps SFP/SFP+ transceiver
  • LEDs: LAN SFP link/activity indication:
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.
  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
    • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Integrated Non-Volatile Memory
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
      • Proxy: ECMA-393 and Windows logo for proxy offload
    • Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
      • IEEE 802.1Qav traffic shaper (with software extensions)
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers

Instructions

Production files