Difference between revisions of "Fitlet2 FACET Cards"
From fit-PC wiki
(→FC-USB) (change visibility) |
(→FC-PCI) (change visibility) |
||
Line 5: | Line 5: | ||
==FC-PCI== | ==FC-PCI== | ||
− | + | * Type: [[Dual FACET Card]] | |
+ | * Features: | ||
+ | ** M.2 E-Key socket (usually used for Wi-Fi) | ||
+ | ** miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem) | ||
+ | ** M.2 M-Key socket 2260 | 2280 for SATA SSD | ||
===Hardware=== | ===Hardware=== |
Revision as of 10:04, 8 October 2018
Function And Connectivity Extension T-Card - (FACET)
- FACET card is an optional extension board providing additional peripherals and IO connectivity options for the fitlet product line.
- The FACET Cards interface is documented to allow 3rd party to design & develop their own application specific FACET Modules.
FC-PCI
- Type: Dual FACET Card
- Features:
- M.2 E-Key socket (usually used for Wi-Fi)
- miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
- M.2 M-Key socket 2260 | 2280 for SATA SSD
Hardware
Schematics
Assembly
Mechanical
FC-CEM
FC-CEM has B-Key M.2 socket (with connected SIM-card socket) + E-Key M.2 socket + M-Key M.2 socket 2280/2260
Schematics
Assembly
Mechanical
FC-USB
FC-USB adds 4 USB2 ports to fitlet2 for a total of 8 ports (2x USB3 + 6x USB2), all type-A connectors
Schematics
Assembly
Mechanical
FC-M2LAN
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
Schematics
Assembly
Mechanical
FC-SCG
The FC-SCG Provides the following connectivity:
- RS232/RS485 COM port
- CANbus connectivity
- GPIO
- NOTE: Works as a GPIO extender only. Does not work as an IRQ Extender
- Linux: GPIO Application
Note: GPIO and CANbus cannot work simultaneously
Schematics
Assembly
Mechanical
FC-POED
FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.