Changes
/* Instructions */
* This page provides technical information about [[fitlet2]] FACET-Cards.
* FACET-Cards extend [[fitlet2]] functionality and I/O.
* FACET-Card stands for '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card'''
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
==Custom FACET-Card design resources==
===Mechanical constraints===
There are two form-factors of FACET-Cards
* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)
====Narrow FACET-Card mechanical constraints====
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.x_t Narrow FACET-Card envelope (x_t)]
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.DXF Narrow FACET-Card envelope (DXF]
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.pdf Narrow FACET-Card envelope (PDF)]
====Wide FACET-Card mechanical constraints====
* [https://fit-iot.com/files/mechanical/FACETS/FACET-wide-type-envelope.x_t wide FACET-Card envelope (x_t)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.DXF wide FACET-Card envelope (DXF)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)]
===FACET-Card pinout===
[[FC-PCI fitlet2 FACET Pinout description table]]
==FC-PCI==
===AssemblySpecifications===*[httpsM.2 sockets://fit-iotM.com/files/fitlet2/docs/fitlet22 Key-FACET-cardsM: 2242/FC-PCI2260/FC-PCI-1R0_ASSY-CS2280 (for SATA SSD)* M.pdf FC2 Key-PCI Side A Assembly]E: 2230 (usually used for WiFi & BT module)*[https://fit-iot.com/files/fitlet2/docs/fitlet2-FACET-cards/FC-Mini PCI/FCconnector -PCIusually used for Cell modem module* Micro-1R0_ASSY-PS.pdf FC-PCI Side B Assembly ]SIM card socket
===MechanicalInstructions===* [[fitlet2 FC-PCI installation instructions]]
===Hardware===* [[FC-PCI Pinout description table]] ===Production files=== *Schematics** [https://fit-iot.com/files/mechanical/FACETS/FACETFC-widePCI/Schematics/FC-typePCI-envelopeREV-1.x_t FACET wide type envelope (x_t)0-schematics.pdf FC-PCI Schematics]*Assembly** [https://fit-iot.com/files/mechanical/FACETS/FITLET2FC-FACETPCI/Assembly/FC-widePCI-type1_1-envelopeAssembly.zip FC-PCI Rev1.1 Assembly files]*Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]*Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FACET wide type envelope (FC-PCI Mechanical - DXF)]<br>** [https://fit-iot.com/files/mechanical/FACETS/FITLET2FC-FACETPCI/Mechanical/FC-widePCI-type-envelopePCB.PDF FACET wide type envelope (FC-PCI Mechanical - PDF)]
==FC-CEM==
* Type: [[Wide FACET Card]]
* Features:
** M.2 E-Key socket (usually used for Wi-Fi)
** M.2 B-Key socket + SIM socket (for M.2 cellular modem)
** M.2 M-Key socket 2260 | 2280 for SATA SSD
<br>
[[File:FC-CEM-top.jpg|200px]]
[[File:FC-CEM-bottom.jpg|200px|middle]]
===Specifications===
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* M.2 Key-B: 3042 (usually used for Cell modem module)
* Micro-SIM card socket
===Instructions===
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Installation-instructions/fitlet2-FC-CEM-installation-instructions.pdf fitlet2 FC-CEM installation instructions]
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
*Assembly
**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
*Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-CEM Mechanical - DXF]<br>
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-CEM Mechanical - PDF]
==FC-USB==
* Type: [[Narrow FACET Card]]
* Features:
** 4x USB2 ports (type A)
fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
<br>
[[File:fc-usb-top.jpg|200px]]
[[File:fc-usb-bottom.jpg|200px|middle]]
===Specifications===
* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
* The USB port supports in single transaction translator (TT)
* port current limit - Up to 0.5A
===Instructions===
* [[fitlet2 FC-USB installation instructions]]
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-1_1-Schematics.zip FC-USB Rev1.1 Schematic files]
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Rev1.1 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files]
*Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
==FC-M2LAN==
* Type: [[Narrow FACET Card]]
* Features:
** 2x Gbit Ethernet ports (Intel i211)
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
<br>
===Specifications===
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
** Proxy: ECMA-393 and Windows logo for proxy offload
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
** Four Software Definable Pins (SDPs)
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
[[File:FC-M2LAN-top.jpg|200px]]
[[File:FC-M2LAN-bottom.jpg|200px|middle]]
===Instructions===
*[[Fitlet2 FC-M2LAN installation instructions]]
===Production files===
*Schematics
**[http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-1_0-Schematics.rar FC-M2LAN Rev1.0 Schematic files]
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files]
*Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
==FC-SCG==
* Type: [[Narrow FACET Card]]
* Features:
** CANbus
** RS232/RS485
** GPIOs
Includes the following socket:
* M.2 E-key 2230 (usually used for WiFi adapter)
<br>
[[File:fc-scg-top.jpg|200px]]
[[File:fc-scg-bottom.jpg|200px|middle]]
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
===Hardware===
* TBD[[FSCG RS232/RS485 pinout table]] ===Application notes===* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]] Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender Note: GPIO and CANbus cannot work simultaneously ===Production files=== *Schematics**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files] Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side] ==FC-POED==* Type: [[Wide FACET Card]]* Features:** 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)** M.2 E-Key socket (usually used for Wi-Fi)** M.2 M-Key socket 2260 | 2280 for SATA SSD FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.<br>[[File:fc-poed-top-front.jpg|200px]][[File:fc-poed-bottom-front.jpg|200px|middle]] ===Specifications===* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)* M.2 Key-E: 2230 (usually used for WiFi & BT module)* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)** PCIe interface: PCIe v2.1 (2.5 GT/s) x1** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)** Proxy: ECMA-393 and Windows logo for proxy offload** Jumbo frames** Interrupt moderation, VLAN support, IP checksum offload** RSS and MSI-X to lower CPU utilization in multi-core systems** Advanced cable diagnostics, auto MDI-X** ECC – error correcting memory in packet buffers** Four Software Definable Pins (SDPs)** Right (DS1) green LED: ON - Link, Blink - Link and activity** Left (DS2) green LED: ON - 100 Mbps link** Left (DS2) orange LED: ON - 1000 Mbps link.** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification* Inrush current limit (200-mA) during startup* Enhanced features includes automatic Maintain Power Signature (MPS) ===Instructions===* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Installation-instructions/fitlet2-FCPOED-Installation-Instructions.pdf fitlet2 FC-POED installation instructions] ===Production files===*Schematics**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_1-Schematics.rar FC-POED Rev1.0 Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POED-1_0Assembly.zip FC-POED Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top] ==FC-OPLN==* Type: [[Wide FACET Card]]* Features:** M.2 E-Key socket (usually used for Wi-Fi)** M.2 M-Key socket 2260 | 2280 for SATA SSD** SFP+ socket for optical GbE connection.<br>[[File:fc-opln-bottom.jpg|200px|middle]][[File:fc-opln-top.jpg|200px]] ===Specifications===* Supported 1Gbps SFP/SFP+ transceiver* LEDs: LAN SFP link/activity indication: ** Right (DS1) green LED: ON - Link, Blink - Link and activity** Left (DS2) green LED: ON - 100 Mbps link** Left (DS2) orange LED: ON - 1000 Mbps link. * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)** M.2 Key-E: 2230 (usually used for WiFi & BT module)* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)** PCIe interface: PCIe v2.1 (2.5 GT/s) x1** Integrated Non-Volatile Memory** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)*** Proxy: ECMA-393 and Windows logo for proxy offload** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization*** IEEE 802.1Qav traffic shaper (with software extensions)** Jumbo frames** Interrupt moderation, VLAN support, IP checksum offload** RSS and MSI-X to lower CPU utilization in multi-core systems** Advanced cable diagnostics, auto MDI-X** ECC – error correcting memory in packet buffers ===Instructions===* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Installation-instructions/fitlet2_FC-OPLN_installation_instructions.pdf FC-OPLN installation instructions] ===Production files===*Schematics**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.zip FC-OPLN Rev1.0 Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files]
[[category:fitlet2]]
[[category:extensionsExtension boards]]
