Difference between revisions of "Fitlet2: BIOS Update"
From fit-PC wiki
Line 4: | Line 4: | ||
'''<span style="color:#FF0000">Important:</span>'''<br /> | '''<span style="color:#FF0000">Important:</span>'''<br /> | ||
− | * BIOS update recommended in case the system is unstable, or required fixes have been released. | + | * BIOS update recommended in case the system is unstable, or required fixes have been released. |
− | * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. | + | * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. |
== Preparing the USB Flash Drive with BIOS Updater == | == Preparing the USB Flash Drive with BIOS Updater == |
Revision as of 12:53, 10 November 2019
Follow us on Twitter for software and BIOS updates
- This page contains information of how to update the fitlet2's firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Startup.nsh
- Copy the extracted files to the prepared UFD
- Download the fitlet2 BIOS file
- Copy the BIOS file to the root directory on the prepared UFD
Updating BIOS
- Connect the prepared UFD to the target fitlet2 and power up
- Press the DEL key during the boot until the BIOS Setup appears
- Browse to the Save & Exit menu
- Click on the Launch EFI Shell from filesystem device option
- The system will boot to the EFI Shell and after 4 seconds the automatic script will start
- Please do not press ESC while the countdown
- The script will find the Storage Device with BIOS update application
- Type the following command: flash flt2.bin and press the Enter key
- The BIOS flashing process will start
- When the process ends and the prompt line appears, type the command: reset and press the Enter key.