Difference between revisions of "Fitlet2: BIOS Update"
From fit-PC wiki
(→Preparing the USB Flash Drive with BIOS Updater) (change visibility) |
(→Preparing the USB Flash Drive with BIOS Updater) (change visibility) |
||
Line 9: | Line 9: | ||
== Preparing the USB Flash Drive with BIOS Updater == | == Preparing the USB Flash Drive with BIOS Updater == | ||
# Connect your USB Flash Drive (UFD) to your computer and format it to '''FAT32''' file system | # Connect your USB Flash Drive (UFD) to your computer and format it to '''FAT32''' file system | ||
− | # Download and extract the '''[ | + | # Download and extract the '''[https://fit-pc.com/download/fitlet2/bios/tools/AFUEFI_BIOS_Updater_Package.zip Bios Updater package]'''.<p>The package contains the following files:</p> |
#:''AfuEfix64.efi'' | #:''AfuEfix64.efi'' | ||
#:''Flash.nsh'' | #:''Flash.nsh'' |
Latest revision as of 08:31, 28 February 2023
Follow us on Twitter for software and BIOS updates
- This page contains information of how to update the fitlet2's firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Startup.nsh
- Copy the extracted files to the prepared UFD
- Download the latest fitlet2 BIOS file
- Copy the BIOS file to the root directory on the prepared UFD
Updating BIOS
- Connect the prepared UFD to the target fitlet2 and power up.
- Press the DEL key during the boot until the BIOS Setup appears.
- Browse to the Save & Exit menu.
- Click on the Launch EFI Shell from filesystem device option.
- The system will boot to the EFI Shell and after 4 seconds the automatic script will start.
Note: Do not press ESC while the countdown. - The script will find the Storage Device with BIOS update application.
- Type the command: flash flt2.bin and press the Enter key (NOTE: in a filename flt.bin the second letter is "L" in lower case!).
- The BIOS flashing process will start.
- When the process ends and the prompt line appears, type the command: reset and press the Enter key.
- The system will restart. Press the DEL key during the boot until the BIOS Setup appears.
- Browse to the Save & Exit menu.
- Click on the Restore Defaults option.
- Disconnect the UFD.
- Click on Save Changes and Exit option.