Difference between revisions of "Fitlet2: BIOS Update"
From fit-PC wiki
(→Updating BIOS) (change visibility) |
(→Updating BIOS) (change visibility) |
||
Line 25: | Line 25: | ||
# The system will boot to the EFI Shell and after 4 seconds the automatic script will start.<br/>'''Note:''' Do not press ESC while the countdown. | # The system will boot to the EFI Shell and after 4 seconds the automatic script will start.<br/>'''Note:''' Do not press ESC while the countdown. | ||
# The script will find the Storage Device with BIOS update application. | # The script will find the Storage Device with BIOS update application. | ||
− | # Type the | + | # Type the command: '''flash flt2.bin''' and press the Enter key. |
# The BIOS flashing process will start. | # The BIOS flashing process will start. | ||
# When the process ends and the prompt line appears, type the command: '''reset''' and press the Enter key. | # When the process ends and the prompt line appears, type the command: '''reset''' and press the Enter key. |
Revision as of 11:46, 7 May 2020
Follow us on Twitter for software and BIOS updates
- This page contains information of how to update the fitlet2's firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Startup.nsh
- Copy the extracted files to the prepared UFD
- Download the fitlet2 BIOS file
- Copy the BIOS file to the root directory on the prepared UFD
Updating BIOS
- Connect the prepared UFD to the target fitlet2 and power up.
- Press the DEL key during the boot until the BIOS Setup appears.
- Browse to the Save & Exit menu.
- Click on the Launch EFI Shell from filesystem device option.
- The system will boot to the EFI Shell and after 4 seconds the automatic script will start.
Note: Do not press ESC while the countdown. - The script will find the Storage Device with BIOS update application.
- Type the command: flash flt2.bin and press the Enter key.
- The BIOS flashing process will start.
- When the process ends and the prompt line appears, type the command: reset and press the Enter key.
- The system will restart. Press the DEL key during the boot until the BIOS Setup appears.
- Browse to the Save & Exit menu.
- Click on the Restore Defaults option.
- Disconnect the UFD.
- Click on Save Changes and Exit option.