Changes
[https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates] == Preparing a bootable UFD USB flash device on a Windows 7 PC ==* # Download Image Writer for Windows. (the [https://launchpadrufus.netakeo.ie/win32-image-writer/)* Download and extract BIOS_UpdaterRufus ] application.zip* # Connect the UFD USB flash device to your host computer PC (ensure that you don't have any other USB mass storage devices connected). * # Run Win32DiskImager.exethe downloaded Rufus application. * # Select Device - the target diskin the "Device" drop-down list. * # Select Image File – BIOS_Updater.imgthe '''“Create a bootable disk using”''' checkbox and choose the '''“FreeDOS”''' in the drop-down list. * # Press Write '''"Start"''' button to proceed. * # Wait until completion.* # Disconnect the UFD USB flash device and connect it again. It should now be assigned a drive letter.* # Download and extract [https://fit-iot.com/files/download/fit-pc3/bios/BIOS_Updater_Package.zip Bios Updater Package].# Copy the biosextracted files to the root directory on the prepared USB flash device # Download the latest BIOS binary file for [[Fit-PC3 BIOS ROM Files|<span style="color:#FF0000">'''fit-PC3'''</span>]] or [[Fit-PC3i BIOS ROM Files|<span style="color:#FF0000">'''fit-PC3i'''</span>]].# Copy the <b>fp3.bin </b> or <b>fp3i.bin</b> file to the root directory on the prepared USB flash device. == Updating BIOS ==# Connect the prepared USB flash device to the fit-PC3 and boot (ensure that the UFDshould be connected to the USB2 connector only).# Press F2 during boot to enter BIOS setup utility.# Set 1st boot priority to USB HDD.# Save and exit.# The fit-PC3 should boot to DOS from the USB device.# Type <b>flash3</b> for fit-PC3 or <b>flash3i</b> for fit-PC3i.# Wait until a "BIOS is updated successfully" message appears.# Disconnect the USB device and reboot. === Links ===* [[fit-PC3:_Software | fit-PC3/3i Software Repository]][[category:fit-PC3]]
