Difference between revisions of "Fit-PC2 BIOS Update"
From fit-PC wiki
Line 3: | Line 3: | ||
# Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected). | # Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected). | ||
# Run '''ImWriter.exe''' | # Run '''ImWriter.exe''' | ||
− | + | ## select ''Target'' - desired disk (by letter/size). | |
− | + | ## select ''Source image'' - '''128MBDOS.img'''. | |
# Press ''Start Restore'' to proceed. | # Press ''Start Restore'' to proceed. | ||
# Wait until completion. | # Wait until completion. |
Revision as of 13:16, 9 July 2009
To prepare bootable USB image on Windows based machine
- Download and extract bios_update.zip
- Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
- Run ImWriter.exe
- select Target - desired disk (by letter/size).
- select Source image - 128MBDOS.img.
- Press Start Restore to proceed.
- Wait until completion.
- Take out thumb drive and insert it again. It should now be assigned a drive letter.
- Copy to the root directory on the thumb drive files SFlash16.exe
- Copy to the root directory on the thumb drive the desired ROM file
To update BIOS
- Insert thumb drive and boot. Press F2 during boot to enter CMOS Setup Utility
- Set 1st boot priority to USB KEY
- Save and exit
fit-PC2 should boot to DOS from the thumb drive.
- Type
SFlash16.exe <ROM file name>
- Wait until completion
- Reboot