[[File:FM-AT3 FACE MODUL BACK.jpeg|700px]]<br>
[[File:FM-AT3 FACE MODULE FRONT.jpg|700px]]
<!=== Mechanical ===* [https://fit-iot.com/download/face-modules/FM-AT2C/hw/FM-AT2C-v1.1-DXF.zip FM-AT2C DXF file]* [[Filehttps:fc//fit-scgiot.com/files/download/face-topmodules/FM-AT2C/hw/FM-AT2C-v1.jpg|200px]1.STEP FM-AT2C 3D STP file]* [[Filehttps:fc//fit-scgiot.com/files/download/face-bottommodules/FM-AT2C/hw/FM-AT2C-v1.jpg|200px|middle]1.x_t FM-AT2C 3D x_t file]
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
===Hardware===
* [[FSCG RS232/RS485 pinout table]]
===Application notes===
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] -->
Back to [[Fit-PC_Product_Line:FACE_Modules]]
