Changes
/* For Windows */
====<ins>For Windows</ins>====
===I can see an additional COM port in the device manager, where is it physically?===
==Software==
===Does fitlet2 supports Virtualization?===
* Yes, the Apollo Lake SoC has built-in Intel-VT.
* This configuration is disabled by default, in order to enable, please perform the following steps:
1. Enter BIOS menu by hitting '''[ESC]''' on startup
2. Navigate to --> ['''Advanced'''] --> ['''CPU configuration'''] --> ['''VT-d''']
3. Set ['''VT-D'''] to ['''Enabled''']
4. Press ['''F4'''] and accept to '''Save&exit'''.
=== How do I Enable PXE boot?===
* Enter BIOS menu by pressing "ESC" on startup
* Navigate to '''Advanced ''' --> '''Network Stack Configuration'''* Set Network stack to '''[Enabled]'''* Configure boot option #1 to '''[Network] ''' at Boot tab* Save changes and exit by pressing '''[F4 ]''' and accepting.
===How Do I Enable Wake-On-Lan (WOL)?===
7. Boot -> Boot Mode Selection : '''[Legacy]'''
8. Press the '''F4''' key to '''Save & Exit'''
=== Linux mint audio codecs do not load properly ===
* The BIOS configuration called "OS selection" at the main menu reflects on how the system loads the audio codecs.
* Changing the OS selection may result with strange sound card behavior, even when returning manually to previously selected option.
* Restoring the machine to its default values may fix this issue:
# Press [Del] during boot to enter BIOS setting
# Press F3 (Optimized Defaults) In the BIOS setting
# Keep the OS selection to Windows - Do not change.
## '''Note''': For Mint Box mini 2 machines, the default is set to "Linux" - Do not change.
# Press F4 (Save & Exit).
* At this point the machine should turn on with BIOS set to defaults and OS selection should be set to "Windows".
* This configuration can be kept for both Linux and Windows.
[[category:fitlet2]]
[[category:FAQ]]
