Changes
==Hardware==
===How to control fitlet2 front LEDsin Linux?===
See [[Application note - fitlet2 has 2 controlling front LEDs, LED1 and LED2. Each of them has GREEN and YELLOW parts that can be controlled separately.on Linux]]
===I can see an additional COM port in the device manager, where What is it physicallythe DC input voltage tolerance for the fitlet2?===
==Software==
===How Do I Enable Wake-On-Lan (WOL)?===
*Enter BIOS menu by hitting '''[ESC]''' on startup
*Navigate to:
Chipset Tab
--> South Cluster Configuration
--> Miscellaneous Configuration
* Wake on Lan should be there '''[Disabled]''' by default
*Enable Wake on Lan and Save&Exit by pressing '''[F4]'''
=== FreeBSD is not working, what can I do?===
There are necessary configuration changes that should be made in order to have FreeBSD work on fitlet2.<br>
Press '''[Del]''' during boot to enter BIOS settings and set the following to:
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support '''[Disabled]'''
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support '''[Disabled]'''
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support '''[Disabled]'''
===How to identify the COM port on Linux ?===
Please refer to the link- [[Linux Mint: Serial port on fitlet2]]
===fitlet2 BIOS Legacy boot doesn't work, how to enable?===
Legacy support is disabled by default in the BIOS menu.<br>
To enable it, please, set the following BIOS menu settings:
1. Advanced -> CSM Configuration -> CSM Support : '''[Enabled]'''
2. Advanced -> CSM Configuration -> Boot option filter : '''[Legacy only]'''
3. Advanced -> CSM Configuration -> Network : '''[Legacy]'''
4. Advanced -> CSM Configuration -> Storage : '''[Legacy]'''
5. Advanced -> CSM Configuration -> Video : '''[Legacy]'''
6. Advanced -> CSM Configuration -> Other PCI devices : '''[Legacy]'''
7. Boot -> Boot Mode Selection : '''[Legacy]'''
8. Press the '''F4''' key to '''Save & Exit'''
[[category:fitlet2]]
[[category:FAQ]]