Changes
/* FreeBSD is not working, what can I do? */
=== How can I get S/PDIF to work on my fitlet2?===
The fitlet2 3.5 Audio jack has a 4th pin that outputs digital audio.<br>In order for this to work, there's a need for a special 4 -pole 3.5mm to RCA cable.<br>This cable is sold in the set of cables package for the fitlet2:- [https://fit-iot.com/web/product/accenc-adflt2/fitlet2 set of cables]
==Software==
=== FreeBSD is not working, what can How Do I doEnable Wake-On-Lan (WOL)?===
*Enable Wake on Lan and Save&Exit by pressing '''[F4]'''
===How to identify the COM port on Linux ?===
Please refer to the link- [[Linux Mint: Serial port on fitlet2]]
===fitlet2 BIOS Legacy boot doesn't work, how to enable?===
Legacy support is disabled by default in the BIOS menu.<br>
To enable it, please, set the following BIOS menu settings:
1. Advanced -> CSM Configuration -> CSM Support : '''[Enabled]'''
2. Advanced -> CSM Configuration -> Boot option filter : '''[Legacy only]'''
3. Advanced -> CSM Configuration -> Network : '''[Legacy]'''
4. Advanced -> CSM Configuration -> Storage : '''[Legacy]'''
5. Advanced -> CSM Configuration -> Video : '''[Legacy]'''
6. Advanced -> CSM Configuration -> Other PCI devices : '''[Legacy]'''
7. Boot -> Boot Mode Selection : '''[Legacy]'''
8. Press the '''F4''' key to '''Save & Exit'''
[[category:fitlet2]]
[[category:FAQ]]