Changes
/* FreeBSD is not working, what can I do? */
===How to control fitlet2 front LEDs?===
==== <ins>For Linux</ins> ====
fitlet2 has 2 LEDs, LED1 and LED2. Each of them has GREEN and YELLOW parts that can be controlled separately.
https://www.kernel.org/doc/Documentation/gpio/gpio.txt
==software=How do you I configure my cellular modem on Linux?===* Please refer to the guide - [[Linux Mint: Mobile broadband]]
====<ins>For Windows</ins>====
TBD
===I can see an additional COM port in the device manager, where is it physically?===
*fitlet2 comes with a single RS232 ultra-mini com port (COM1)
*There is another COM ports inside the chassis (COM2) for the use of developing additional FACET cards.
*The additional COM port is not accessible externally
===What is the DC input voltage tolerance for the fitlet2?===
The fitlet2 model can work at a wide DC input voltage range of 9V-20V.
<br>This range can also be extended to 9V-36V if the model is configured with the P36 option.
=== What is the fitlet2's RTC backup battery accuracy?===
* RTC accuracy – less than 1 sec per day
=== How can I get S/PDIF to work on my fitlet2?===
The fitlet2 3.5 Audio jack has a 4th pin that outputs digital audio.<br>
In order for this to work, there's a need for a 4-pole 3.5mm to RCA cable.<br>
This cable is sold in the set of cables package for the fitlet2 - [https://fit-iot.com/web/product/accenc-adflt2/ fitlet2 set of cables]
==Software==
===How Do I Enable Wake-On-Lan (WOL)?===
*Enter BIOS menu by hitting '''[ESC]''' on startup
*Navigate to:
Chipset Tab
--> South Cluster Configuration
--> Miscellaneous Configuration
* Wake on Lan should be there '''[Disabled]''' by default
*Enable Wake on Lan and Save&Exit by pressing '''[F4]'''
=== FreeBSD is not working, what can I do?===
There are necessary configuration changes that should be made in order to have FreeBSD work on fitlet2.<br>
Press '''[Del]''' during boot to enter BIOS settings and set the following to:
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support '''[Disabled]'''
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support '''[Disabled]'''
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support '''[Disabled]'''
===How to identify the COM port on Linux ?===
Please refer to the link- [[Linux Mint: Serial port on fitlet2]]
===fitlet2 BIOS Legacy boot doesn't work, how to enable?===
Legacy support is disabled by default in the BIOS menu.<br>
To enable it, please, set the following BIOS menu settings:
1. Advanced -> CSM Configuration -> CSM Support : '''[Enabled]'''
2. Advanced -> CSM Configuration -> Boot option filter : '''[Legacy only]'''
3. Advanced -> CSM Configuration -> Network : '''[Legacy]'''
4. Advanced -> CSM Configuration -> Storage : '''[Legacy]'''
5. Advanced -> CSM Configuration -> Video : '''[Legacy]'''
6. Advanced -> CSM Configuration -> Other PCI devices : '''[Legacy]'''
7. Boot -> Boot Mode Selection : '''[Legacy]'''
8. Press the '''F4''' key to '''Save & Exit'''
[[category:fitlet2]]
[[category:FAQ]]
