Changes
=== What is “Airtop”? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/irads-question/ What is “Airtop”?]
== Natural airflow technology ==
=== Does Airtop work in summer? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/does-airtop-work-in-summer/ Does Airtop work in summer?]
=== Can the air-tubes get clogged with dust? Are there filters? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/can-the-air-tubes-get-clogged-with-dust-are-there-filters/ Can the air-tubes get clogged with dust? Are there filters?]
=== Will Airtop work in a hot and humid climate? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/will-airtop-work-in-a-hot-and-humid-climate/ Will Airtop work in a hot and humid climate?]
== Noise ==
=== How should I configure Airtop if silence is my top priority? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/how-should-i-configure-airtop-if-silence-is-my-top-priority/ How should I configure Airtop if silence is my top priority?]
=== Is Airtop totally silent? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/is-airtop-totally-silent/ Is Airtop totally silent?]
== Hardware ==
=== What is the power consumption of Airtop? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/what-is-the-power-consumption-of-airtop/ What is the power consumption of Airtop?]
=== Which power supplies can power the Airtop? ===
Airtop bundle comes with external AC/DC wall power supply, providing unregulated 19Vdc @ 13.15A max input. However, any power supply able to supply ~250W from 19Vdc source will be fine.
=== Digital Display Interfaces ===
Airtop features 3 digital display interfaces, 2x HDMI and 1x DisplayPort, capable driving 3 independent displays up to 4K resolution. During boot stage 2 of 3 displays are active, and can be set in BIOS. Default outputs are HDMI1 and HDMI2. When OS has been loaded the third display become operational as well.
Refer to [http://www.fit-pc.com/wiki/index.php/IPC2_BIOS_guide#System_Agent_.28SA.29_Configuration System Agent (SA) Configuration] in [[Airtop BIOS Guide]] to setup Airtop display operation
Notes:
* DisplayPort is not multiplexed with HDMI port on the silicon therefore only During boot stage 2 of 3 displays are active adapter will work for DP-to-HDMI conversion, and can be set in BIOS. Default outputs are HDMI1 and HDMI2. When OS has been loaded the third display becomes operational as well.
=== Airtop serial ports ===
# The most reliable RS232 serial communication is the one uses full signal set or at least 4-wire, data (Tx/Rx) and flow control signals (CTS/RTS).
=== Is there an Airtop with only integrated graphics? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/is-there-an-airtop-with-only-integrated-graphics/ Is there an Airtop with only integrated graphics?]
=== Can I install my own graphics card in Airtop? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/can-i-install-my-own-graphics-card-in-airtop/ Can I install my own graphics card in Airtop?]
=== How do you put a full-height graphics card in a 100mm wide case? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/how-do-you-put-a-full-height-graphics-card-in-a-100mm-wide-case/ How do you put a full-height graphics card in a 100mm wide case?]
=== Is it possible to attach a PCIe SSD and boot from it? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/is-it-possible-to-attach-a-pcie-ssd-and-boot-from-it/ Is it possible to attach a PCIe SSD and boot from it?]
=== Is the WiFi module removable? ===
Please refer to Q&A section on airtop-pc.com [http://airtop-pc.com/faq-items/is-the-wifi-module-removable/ Is the WiFi module removable?]
== Software ==
=== Boot Airtop in UEFI mode ===
#Before UEFI OS installation, CSM Support option should be disabled in BIOS Setup.
#The CSM Support option is in the Main -> Boot Features sub-menu.
#After CSM Support disable, Legacy Boot option will be disabled automatically.
=== Configure Airtop boot delay ===
If Airtop boot time is too fast (making it access BIOS menu not easy) the user can configure the boot delay (splash screen timeout) and avoid such issues:
2. On computer start Clicking F5 will bring you into one-time boot selection menu
