Changes
# FM-SER is classified as DTE (Data Terminal Equipment) in terms of RS232 standard definition.
# RS485 half-duplex mode requires special HW/SW adaptation
[[File:FM-SER_image.jpg|700px]]
=== Block Diagram ===
Note:
# The jumper is assembled by default
''Jumper E1 location''
[[File:FM-SER_jumper.png]]
After power-up, any individual port can be configured using software controlled SMBus system management protocol.
'''CAN Bus power supply'''
By default, the FM-SER consumes power from the CAN bus.
After power-up, the power supply option can be determined by a GPIO line connected to the motherboard, and is fully software controlled.
=== Schematics ===
* [http://fit-pc.com/download/face-modules/fm-ser/hw/rev1.1/FM-SER_REV1.1_Layout.zip FM-SER layout files]
=== Mechanics Mechanical ===* [http://fit-pc.com/download/face-modules/fm-ser/hw/rev1.1/FM-SER_REV1.1_Mechanics.zip FM-SER mechanics mechanical files]
=== Assembly ===
=== SW Drivers ===
* [http://fit-pc.com/download/face-modules/fm-ser/sw/FM-SER_Win7_2013.07.09.zip FM-SER Windows 7 /8.1/10 driver] * [http://fit-pc.com/download/face-modules/fm-1lan/sw/windows-drivers/fm-1lan-win7_ethernet_drivers_2012.12.04.zip Windows 7 Ethernet driver package] [[Category:Extension boards]][[Category:FACE modules]]
