Difference between revisions of "Cellular modem configuration via Linux command line (for non-GUI OS)"
From fit-PC wiki
(Created page with "Cellular modem configuration from command line in non-GUI Linux distributions Terminal only): # Install wvdial tool: ## NOTE: On different Linux Distributions installatio...") (change visibility) |
(No difference)
|
Revision as of 10:20, 8 March 2017
Cellular modem configuration from command line in non-GUI Linux distributions Terminal only):
# Install wvdial tool: ## NOTE: On different Linux Distributions installation command may be different $ sudo apt install wvdial # Configuration file /etc/wvdial.conf should look like this: $ cat /etc/wvdial.conf [Dialer Defaults] Init1 = ATZ Init2 = AT+CGDCONT=1,"IP","net.hotm" Baud = 115200 Modem = /dev/ttyACM3 Phone = *99# Password = dummy Username = dummy ## NOTE: replace "net.hotm" with your operator name # Run wvdial dialer $ sudo wvdial & # Thats all, press [Enter] to get to the command line again and test your connection: $ ping google.com