Difference between revisions of "Application note - Airtop3 serial port configuration in Linux"
From fit-PC wiki
(Created page with "* This application note is applicable to Airtop3 * It provides configuration instructions to work with COM1 and COM3 in Linux environment. == Instructions == * There are 2 se...") (change visibility) |
|||
(4 intermediate revisions by the same user not shown) | |||
Line 8: | Line 8: | ||
</pre> | </pre> | ||
* COM1 is accessible as device node /dev/ttyUSB0 | * COM1 is accessible as device node /dev/ttyUSB0 | ||
− | * COM3 is accessible as device node /dev/ttyS6 starting from BIOS version ATOP3.PRD.0.30.3 and with kernel boot option "acpi_osi=Linux" | + | * COM3 is accessible as device node /dev/ttyS6 starting from BIOS version [[Airtop3 BIOS files | ATOP3.PRD.0.30.3]] and with kernel boot option "acpi_osi=Linux" |
<pre> | <pre> | ||
# NOTE: to add kernel boot option "acpi_osi=Linux" please do: | # NOTE: to add kernel boot option "acpi_osi=Linux" please do: | ||
Line 14: | Line 14: | ||
$ sudo update-grub2 | $ sudo update-grub2 | ||
</pre> | </pre> | ||
+ | |||
+ | [[category: Airtop3]] | ||
+ | [[category: application notes]] | ||
+ | [[category: software]] |
Latest revision as of 11:21, 8 January 2020
- This application note is applicable to Airtop3
- It provides configuration instructions to work with COM1 and COM3 in Linux environment.
Instructions
- There are 2 serial ports available for usage: COM1 and COM3
# NOTE: COM2 intended for BIOS debugging and not available as regular COM port!
- COM1 is accessible as device node /dev/ttyUSB0
- COM3 is accessible as device node /dev/ttyS6 starting from BIOS version ATOP3.PRD.0.30.3 and with kernel boot option "acpi_osi=Linux"
# NOTE: to add kernel boot option "acpi_osi=Linux" please do: $ sudo sed '/GRUB_CMDLINE_LINUX_DEFAULT=/s/.$/\ acpi_osi=Linux\"/' -i /etc/default/grub $ sudo update-grub2