Airtop Troubleshooting
From fit-PC wiki
Revision as of 08:29, 24 August 2016 by Maxim (Talk | contribs) (Created page with "1. Airtop BIOS reset: *Power down the PC and unplug the power cable. *Open the service door. *Remove the disks cartridge. *Reset the BIOS by pressing the low profile push butt...")
1. Airtop BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door.
- Remove the disks cartridge.
- Reset the BIOS by pressing the low profile push button SW4 (RTC_RST) for 3 seconds.
- Mount the disks cartridge and close the door.
- Plug the power and power up the PC (either auto-on or pressing power button).
2. Verify RAM memory modules are installed -
- The system will not boot without memory.
3. Verify power up without storage
4. Power supply:
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.