Difference between revisions of "Airtop3 BIOS Update"
From fit-PC wiki
(→= Updating Intel ME) (change visibility) |
|||
Line 20: | Line 20: | ||
# Follow on screen instructions | # Follow on screen instructions | ||
− | == Updating Intel ME= | + | == Updating Intel ME== |
+ | # Download the ME update package from [[Airtop3 ME package]] | ||
# Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system | # Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system | ||
# Download and extract the update package to the UFD | # Download and extract the update package to the UFD |
Revision as of 13:14, 7 January 2020
Follow us on Twitter for software and BIOS updates
- This page contains information on how to update the Airtop3 firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download the update package from the Airtop3 BIOS files
Updating BIOS
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the update package to the UFD
- Connect the UFD to the target Airtop3 and power up
- Press the F7 key during the boot until the "Select boot device" menu appears
- Select the UFD on the menu and press ENTER
- The system will boot to EFI Shell and after 5 seconds the startup script will start (Please do not press ESC)
- The BIOS flashing process will start
- Follow on screen instructions
Updating Intel ME
- Download the ME update package from Airtop3 ME package
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the update package to the UFD
- Connect the UFD to the target Airtop3 and power up
- Press the F7 key during the boot until the "Select boot device" menu appears
- Select the UFD on the menu and press ENTER
- The system will boot to EFI Shell and after 5 seconds the startup script will start (Please do not press ESC)
- The ME flashing process will start
- Follow on screen instructions