Changes
# Enter BIOS menu by pressing ['''ESC'''] on startup
# Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled''']
# Navigate to "'''Save & Exit'''" Tab, and choose to Save and Exit option.# right Right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br>
# Enter AMT configuration settings, you'll be prompted to enter a password.<br>
# Change the default password. The default password is "admin". The new password has the comply with the following policies:<br>
'''Optional:''' The AMT system uses DHCP to configure an IP Address.
* If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.
[[Category: Airtop3]]
[[Category: application notes]]
