From fit-PC wiki
Revision as of 14:51, 14 March 2018 by Tamir
Airtop2 BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door.
- Remove the disks cartridge.
- Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
- Mount the disks cartridge and close the door.
- Plug the power and power up the PC (either auto-on or pressing power button).
Check memory (RAM)
Verify RAM modules are installed. The system will not boot without it.
Check storage (HDD/SSD):
Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
Check power supply (PSU):
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.