Difference between revisions of "Fitlet2 FACET Cards"
From fit-PC wiki
(→Specifications) (change visibility) |
|||
Line 218: | Line 218: | ||
===Specifications=== | ===Specifications=== | ||
− | * | + | |
+ | * Supported 1Gbps SFP/SFP+ transceiver | ||
+ | * LEDs: LAN SFP link/activity indication: | ||
+ | ** Right (DS1) green LED: ON - Link, Blink - Link and activity | ||
+ | ** Left (DS2) green LED: ON - 100 Mbps link | ||
+ | ** Left (DS2) orange LED: ON - 1000 Mbps link. | ||
+ | * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD) | ||
+ | ** M.2 Key-E: 2230 (usually used for WiFi & BT module) | ||
+ | * Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps) | ||
+ | * PCIe interface: PCIe v2.1 (2.5 GT/s) x1 | ||
+ | * Integrated Non-Volatile Memory | ||
+ | * Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE) | ||
+ | ** Proxy: ECMA-393 and Windows logo for proxy offload | ||
+ | * Audio-video bridging: IEEE 1588/802.1AS precision time synchronization | ||
+ | ** IEEE 802.1Qav traffic shaper (with software extensions) | ||
+ | * Jumbo frames | ||
+ | * Interrupt moderation, VLAN support, IP checksum offload | ||
+ | * RSS and MSI-X to lower CPU utilization in multi-core systems | ||
+ | * Advanced cable diagnostics, auto MDI-X | ||
+ | * ECC – error correcting memory in packet buffers | ||
[[category:fitlet2]] | [[category:fitlet2]] | ||
[[category:Extension boards]] | [[category:Extension boards]] |
Revision as of 09:08, 14 March 2019
Function And Connectivity Extension T-Card - (FACET)
- This page provides technical information of the fitlet2 compatible FACET cards.
- FACET-Cards extend fitlet2 functionality and I/O.
Contents
Custom FACET-Card design resources
Mechanical constraints
There are two form-factors of FACET-Cards
- Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
- Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)
Narrow FACET-Card mechanical constraints
Wide FACET-Card mechanical constraints
FACET-Card pinout
FC-PCI fitlet2 FACET Pinout description table
FC-PCI
- Type: Wide FACET Card
- Features:
- M.2 E-Key socket (usually used for Wi-Fi)
- miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
- M.2 M-Key socket 2260 | 2280 for SATA SSD
Instructions
Hardware
Schematics
Component placement
Mechanical
FC-PCI Mechanical - DXF
FC-PCI Mechanical - PDF
Specifications
- TBD
FC-CEM
- Type: Wide FACET Card
- Features:
- M.2 E-Key socket (usually used for Wi-Fi)
- M.2 B-Key socket + SIM socket (for M.2 cellular modem)
- M.2 M-Key socket 2260 | 2280 for SATA SSD
Instructions
Schematics
Component placement
Mechanical
FC-PCI Mechanical - DXF
FC-PCI Mechanical - PDF
Specifications
- TBD
FC-USB
- Type: Narrow FACET Card
- Features:
- 4x USB2 ports (type A)
fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
Instructions
Schematics
Component placement
Mechanical
Specifications
- TBD
FC-M2LAN
- Type: Narrow FACET Card
- Features:
- 2x Gbit Ethernet ports (Intel i211)
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
Instructions
Schematics
Component placement
Mechanical
Specifications
- TBD
FC-SCG
- Type: Narrow FACET Card
- Features:
- CANbus
- RS232/RS485
- GPIOs
Includes the following socket:
- M.2 E-key 2230 (usually used for WiFi adapter)
Application notes
- Application note - CANbus on fitlet2 with FC-SCG running Linux
- Application note - GPIO on fitlet2 with FC-SCG running Linux
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously
Schematics
Component placement
Mechanical
Specifications
- TBD
FC-POED
- Type: Wide FACET Card
- Features:
- 802.3af compliant PoE device port with Gbit Ethernet (Intel i211)
- M.2 E-Key socket (usually used for Wi-Fi)
- M.2 M-Key socket 2260 | 2280 for SATA SSD
FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
Instructions
Schematics
Component placement
Mechanical
Specifications
- TBD
FC-OPLN
- Type: Wide FACET Card
- Features:
- M.2 E-Key socket (usually used for Wi-Fi)
- M.2 M-Key socket 2260 | 2280 for SATA SSD
- SFP+ socket for optical GbE connection.
Schematics
Component placement
Mechanical
Specifications
- Supported 1Gbps SFP/SFP+ transceiver
- LEDs: LAN SFP link/activity indication:
- Right (DS1) green LED: ON - Link, Blink - Link and activity
- Left (DS2) green LED: ON - 100 Mbps link
- Left (DS2) orange LED: ON - 1000 Mbps link.
- provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
- M.2 Key-E: 2230 (usually used for WiFi & BT module)
- Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
- PCIe interface: PCIe v2.1 (2.5 GT/s) x1
- Integrated Non-Volatile Memory
- Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
- Proxy: ECMA-393 and Windows logo for proxy offload
- Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
- IEEE 802.1Qav traffic shaper (with software extensions)
- Jumbo frames
- Interrupt moderation, VLAN support, IP checksum offload
- RSS and MSI-X to lower CPU utilization in multi-core systems
- Advanced cable diagnostics, auto MDI-X
- ECC – error correcting memory in packet buffers