Changes
<span style="color:#FF0000"> '''Note''': fit-PC3 requires different BIOS image </span>
== BIOS Changelog ==
*SBCFP3_2.1.0.333_14
**Skip PCIe Initialization option is added
**ASPM is disabled
*SBC_2.1.0.333_13
**Added OPROM load support
**Added an option to skip Initialization of the external PCI port
**Removed unnecessary output strings in the splash-screen
*SCT_2.1.0.333_12
**SATA 3 support is added
**DMI strings support is added. '''DMI strings can be updated in the fit-PC3 rev. 2.3 only'''
**Boot priorities are changed
*SCT_2.1.0.333_11
**Separate flashing mechanism for SPI Flash Numonyx M25P16 is added
**Memory Initialization issue is fixed
*SCT_2.1.0.333_10
**Watchdog support is added
*SCT_2.1.0.333_9
**PXE boot support for SBC Realtek network controller is added.
**Full-size mPCIe selection (mSATA/PCIe) is added
**UART selection (Serial/IR) is added
**Video output D1 selection (HDMI/Display Port) is added
**BIOS Setup customization is made
*SCT_2.1.0.333_8
**NB PCIe port support is added
**Numonyx M25PX16 SPI Flash support is added
**Aggressive CPU power management (CPU noise reduction) is implemented
*SCT_2.1.0.333_7
**Numonyx M25P16 SPI Flash support is added
*SCT_2.1.0.333_6
**BIOS Setup customization
*SCT_2.1.0.333_5
**Ethernet controller issue is fixed
**SATA 4,5 (eSATA) detection issue is fixed
**UART issue is fixed
