Difference between revisions of "Tensor-PC TEL Modules"

From fit-PC wiki
Jump to: navigation, search
(Networking TELs)   (change visibility)
(Input/Output TELs)   (change visibility)
Line 18: Line 18:
 
* [[TEL-USB3X4V | '''TEL-USB3X4V ''']] (''4x USB3.1 type A'')
 
* [[TEL-USB3X4V | '''TEL-USB3X4V ''']] (''4x USB3.1 type A'')
 
* [[TEL-USB2X4V | '''TEL-USB2X4V ''']] (''4x USB2.0 type A'')
 
* [[TEL-USB2X4V | '''TEL-USB2X4V ''']] (''4x USB2.0 type A'')
* [[TEL-USB3PCIV4 | '''TEL-USB3PCIV4 ''']] (''"4x USB 3.1 type A vertical connectors'')
+
<!-- * [[TEL-USB3PCIV4 | '''TEL-USB3PCIV4 ''']] (''"4x USB 3.1 type A vertical connectors'')
<!-- * [[TEL-SERDB9 | '''TEL-SERDB9 ''']] (''1x RS232/RS485 by DB9 (to be used with TEL-SERX4)'') -->
+
* [[TEL-SERDB9 | '''TEL-SERDB9 ''']] (''1x RS232/RS485 by DB9 (to be used with TEL-SERX4)'') -->
  
 
=== Networking TELs===
 
=== Networking TELs===

Revision as of 06:17, 29 August 2021

  • This page provides technical information about Tensor-PC TEL Modules.
  • TEL Moduless extend Tensor-PC functionality and I/O.
  • TEL Modules stands for TEnsor ELlement. An extension card for Tensor-PC. Multiple TELs can be installed at the same time.
  • TEL Modules standard is open to allow 3rd parties to design their own application specific TEL Modules
  • The full production files of each Compulab TEL Modules are published below to allow 3rd parties to modify for their needs

Tensor-PC TEL Modules Types

Input/Output TELs

Networking TELs

Storage TELs

Extension TELs

  • TEL-M2B (an M.2 key-B socket with SIM card tray + 2x Pentaband antennas (each with a panel and MHF cable))
  • TEL-M2E (an M.2 key-E socket + 2x Wi-Fi antennas (each with a panel and MHF cable))
  • TEL-MINIPCIE (a mini PCIe socket with SIM card tray + 2x Pentaband antennas (each with a panel and U.FL cable))

Power Modules

  • TEL-FO (Standard power module for 12VDC PSU with twist lock, Incl. 60W PSU and AC cord.)
  • TEL-FP (Wide power module for 12V - 56V DC, ATX connector with locking, Incl. 120W PSU and AC cord.)