Tensor-I22: BIOS Update

• This page contains information of how to update the Tensor-I22 firmware.

Important:

* BIOS update recommended in case the system is unstable, or required fixes have been released.
* Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.

Preparing the USB Flash Drive with BIOS Updater

1. Connect the USB Flash Drive (UFD) to your computer and format it to the FAT32 file system.
2. Download and extract the latest Tensor-I22 BIOS ready package
3. Copy the extracted files to the formatted UFD
4. Disconnect the prepared UFD and connect it to the target fitlet3 unit.

Updating the BIOS

1. Power on the Tensor-I22 unit.
2. Press the F7 key during the boot until the "Select boot device" menu appears (it may take a while).
3. Select the UFD on the menu and press ENTER.
4. The system will boot to the EFI Shell. The automatic script will start after 5 seconds countdown.
   Note: Do not press ESC during the countdown.
5. The BIOS flashing process will begin.
6. Follow on-screen instructions
7. Upon first boot, enter the BIOS menu by pressing the Del or Esc key, navigate to the "Save & Exit" page, and select the "Restore Defaults" setting.

Notes

1. The first boot after the BIOS update might take a long time and several restarts.