Difference between revisions of "TEL-POEX2"
From fit-PC wiki
(→TEL-POEX2) (change visibility) |
(→TEL-POEX2) (change visibility) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==TEL-POEX2== | ==TEL-POEX2== | ||
* Type: '''Network''' | * Type: '''Network''' | ||
| − | * Config name: ''' | + | * Config name: '''FU''' |
* Compulab part number: '''FT.U-POE2''' | * Compulab part number: '''FT.U-POE2''' | ||
* Interface: '''2x PCIe''' | * Interface: '''2x PCIe''' | ||
| Line 14: | Line 14: | ||
===Specifications=== | ===Specifications=== | ||
* 2x Gbit Ethernet with PoE source (PSE) | * 2x Gbit Ethernet with PoE source (PSE) | ||
| − | * POE+ 802.3at | + | * POE+ 802.3at Type 1 15.4W per port. |
* Using Intel i210, each port is on an independent PCIe port. | * Using Intel i210, each port is on an independent PCIe port. | ||
* Using RJ45 ports. | * Using RJ45 ports. | ||
| Line 23: | Line 23: | ||
* [https://fit-iot.com/files/mechanical/TELS/TEL-POEX2/Installation-instructions/TensorPC-TEL-POEX2-installation-instructions.pdf TensorPC TEL-POEX2 installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-POEX2/Installation-instructions/TensorPC-TEL-POEX2-installation-instructions.pdf TensorPC TEL-POEX2 installation instructions] | ||
--> | --> | ||
| + | |||
===Production files=== | ===Production files=== | ||
Latest revision as of 09:41, 13 September 2021
TEL-POEX2
- Type: Network
- Config name: FU
- Compulab part number: FT.U-POE2
- Interface: 2x PCIe
- TRIP: 2,3,4,5,6
- Stacking: C, A (W30)
- Features: 2x Gbit Ethernet with PoE PSE 802.3at Type 1 by RJ45
Specifications
- 2x Gbit Ethernet with PoE source (PSE)
- POE+ 802.3at Type 1 15.4W per port.
- Using Intel i210, each port is on an independent PCIe port.
- Using RJ45 ports.
- 12 ports can be installed
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules
