Difference between revisions of "TEL-GPIO"
From fit-PC wiki
(→Specifications) (change visibility) |
(→TEL-GPIO) (change visibility) |
||
| Line 3: | Line 3: | ||
* Type: '''COM''' | * Type: '''COM''' | ||
* Config name: '''FS''' | * Config name: '''FS''' | ||
| + | * Compulab part number: '''FT.S_GPIO''' | ||
* Interface: '''USB2.0''' | * Interface: '''USB2.0''' | ||
| − | * TRIP | + | * TRIP: '''2,3,4,5,6,7,7B,8,9''' |
* Stacking: '''A, C''' | * Stacking: '''A, C''' | ||
* Features: '''20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each''' | * Features: '''20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each''' | ||
Revision as of 12:08, 25 August 2021
TEL-GPIO
- Type: COM
- Config name: FS
- Compulab part number: FT.S_GPIO
- Interface: USB2.0
- TRIP: 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- 4 I/O GPIO on the device
- Extendable up to 20 Isolated I/O GPIO.
- Switch selectable GPIO power level(3.3v / 5.0v).
- 2500 V rms for 1 minute per UL 1577
- Unidirectional Isolation block.
- Programmable GPIO input or output.
- Reprogrammable MCU FW using build-in bootloader and openly available tools.
- TEL-GPIO is Utilizing a USB2 Interface
- Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed
- Ambient Operation from –40°C to 85°C.
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules
