Changes
/* Hardware design files */
* Single CAN device
* Supports CAN 2.0A Specifications. * Supports ISO 11898-2 * Up too 1Mbit/s bit rate.
== Features ==
* CANbus through DB-9 Connector
* Implimented Implemented using STM32F042C6 MCU ToDo: single CANbus device or multiple? More information about CANbus capabilities ToDo: microcontroller? Which?
=== Software ===
* Windows and Linux support
=== Configuration ===
* Two Code implementations in one device switchable by a DIP Switch.
* Defult Default [https://github.com/linklayer/cantact-fw CANable ] USB CDC implementation & [https://github.com/candle-usb/candleLight_fw candleLight] USB device implimintationimplemintation. ToDo: please elaborate what are the code implementations
* DIP switch for enabling/disabling on-board 120 Ohm termination
=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available
* Designed for Hacking - Easily scriptable using an open[https://python-source can.readthedocs.io/en/master/ Python SW library. ToDo: firmware or software, not clear] for easy and cross-platform communication to the device
== Connection requirements ==
==Block diagram==
== Mechanical model ==
== Hardware design files ==
== Software source files ==