Changes

Jump to: navigation, search

TEL-CANBUS technical documentation

550 bytes added, 12:01, 25 August 2021
/* Hardware design files */
TEL-CANBUS provides a CANbus interface with isolation through a DB-9 connector.
* Single CAN device * Supports CAN 2.0A Specifications. * Supports ISO 11898-2 * Up too 1Mbit/s bit rate.
  ToDo: CANbus version? ToDo: Data rate? TEL-CANBUS is utilizing a USB2 interface.Multiple TEL-CANBUS cards can be installed in a system.
== Features ==
* CANbus through DB-9 Connector
ToDo: single CANbus device or multiple? More information about CANbus capabilities ToDo: microcontroller? Which?* Implemented using STM32F042C6 MCU
=== Software ===
* Windows and Linux support
=== Configuration ===
* Two Code implementations in one device switchable by a DIP Switch.
ToDo* Default [https: please elaborate what are the code implementations//github.com/linklayer/cantact-fw CANable ] USB CDC implementation & [https://github.com/candle-usb/candleLight_fw candleLight] USB device implemintation.
* DIP switch for enabling/disabling on-board 120 Ohm termination
ToDo* Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https: can //github.com/Compulab-Tensor-PC/TEL-CANBUS/blob/master/README.md#firmware be upgraded? How?-update GitHub])
=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available
* Designed for Hacking - Easily scriptable using an open[https://python-source can.readthedocs.io/en/master/ Python SW library. ToDo: firmware or software, not clear] for easy and cross-platform communication to the device
== Connection requirements ==
==Block diagram==
ToDo[[File: Add block diagram  ToDo: nice looking DBTEL-9 PinoutCANBUS_Rev.1.0_block_Diagram.jpg|200px]]
== Mechanical model ==
ToDo* [https: Add 3D model//fit-iot.com/files/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Mechanical_8010128001.zip TEL-CANBUS Mechanical - DXF]<br>
== Hardware design files ==
ToDo* [https: Add Gerbers //fit-iot.com/files/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Gerber_8040128001.zip TEL-CANBUS Gerber files]<br> ToDo* [https: Add Schematics//fit-iot.com/files/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Schematics_8000128001.zip TEL-CANBUS Rev 1.0.1 Schematic files]
== Software source files ==
865
edits