Changes

Jump to: navigation, search

TEL-CANBUS technical documentation

586 bytes added, 15:07, 26 May 2020
= Description = Part number == TEL-CANBUS Is an isolated USB to Controller Area Network (CAN) extension board FT.Q_CAN
== Description == TEL-CANBUS provides CANbus interface with isolation through a DB-9 connector.  ToDo: CANbus version? ToDo: Data rate? TEL-CANBUS is utilizing a USB2 interface.Multiple TEL-CANBUS cards can be installed in a system. == Features ==* USB to CANbus through DB-9 Connector. ToDo: single CANbus device or multiple? More information about CANbus capabilities ToDo: microcontroller? Which?=== Software ===* Windows and Linux support** Driverless operation on in Windows and optional ** USB native device for in Linux system.* Two Code implementations in one device switchable by an onboard switch.=== Electrical and environmental ===* Isolation per UL1577 (Standard for Optical Isolators)[https://standardscatalog.* Isolated DC 5V powerul.com/standards/en/standard_1577_5 UL 1577]
* Transient immunity: 30kV/uS.
* Isolated DC 5V power
* Ambient Operation from –40°C to 125°C.
=== Configuration ===* Selectable Termination 120RTwo Code implementations in one device switchable by a DIP Switch. ToDo: please elaborate what are the code implementations* Open Source DIP switch for enabling/disabling on- All board 120 Ohm termination ToDo: can firmware be upgraded? How? === Open source hardware and software ===* Complete hardware design files are available under a permissive license.* Cross-platform - works on MAC, Linux, and windows.Complete firmware is available
* Designed for Hacking - Easily scriptable using an open-source Python library.
ToDo: firmware or software, not clear
== Connection requirements ==
* [[TRIP.]]or* Optionally USB connector without using a TRIP.[[USBTT]]
== Version information ==
Latest HW Version Rev 1.0
 
Part number: FT.Q_CAN
==Block diagram==
* ToDo: Add block diagram
* Add ToDo: nice looking DB-9 Pinout
==Mechanical footprintmodel ==* ToDo: Add 3D model
==Design Hardware design files==* ToDo: Add Gerbers * ToDo: Add Schematics
==Software source files ==
ToDo add files<br>* [https://github.com/Compulab-Tensor-PC/TEL-CANBUSFirmware source files on GitHub]