Changes

Jump to: navigation, search

TEL-GPIO technical documentation

1,693 bytes added, 13:53, 31 May 2020
Created page with "== Compulab part number == '''FT.S_GPIO''' == Description == TEL-GPIO provides Isolated GPIO input-output via USB CDC implementation * 4 I/O GPIO on the device * Extendabl..."
== Compulab part number ==
'''FT.S_GPIO'''

== Description ==
TEL-GPIO provides Isolated GPIO input-output via USB CDC implementation

* 4 I/O GPIO on the device
* Extendable up to 20 Isolated I/O GPIO.
* Switch selectable GPIO power level(3.3v / 5.0v).
* Unidirectional Isolation block.
* Programmable GPIO input or output.
* Reprogrammable MCU FW using build-in bootloader and openly available tools.
* TEL-GPIO is Utilizing a USB2 Interface
* Multiple TEL-GPIO cards can be installed in a system.


== Features ==
* GPIO through Terminal block connector
* Implemented using on Core: Arm® 32-bit Cortex®-M0 CPU - STM32F072CB

=== Software ===
* Windows and Linux support
** Driverless operation in Windows and Linux

=== Electrical and environmental ===
* Isolation per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577]
* 2500 V rms for 1 minute per UL 1577
* Ambient Operation from –40°C to 85°C.

=== Configuration ===

* Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https://github.com/Compulab-Tensor-PC/FT_S.GPIO])

=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available


== Connection requirements ==
=== Host interface ===
USB2
=== Physical connection ===
* [[TRIP]]
or
* [[USBTT]]

== Version information ==
Latest HW Version Rev 1.0

==Block diagram==


ToDo: Add block diagram

== Mechanical model ==
ToDo: Add 3D model

== Hardware design files ==
ToDo: Add Gerbers
ToDo: Add Schematics

== Software source files ==

ToDo add files
* [https://github.com/Compulab-Tensor-PC/FT_S.GPIO Firmware source files on GitHub]
61
edits