Jump to: navigation, search

TEL-CANBUS technical documentation

1,295 bytes added, 12:01, 25 August 2021
/* Hardware design files */
= Description = Compulab part number == '''FT.Q_CAN Is an isolated USB to Controller Area Network (''' == Description == TEL-CANBUS provides a CANbus interface with isolation through a DB-9 connector. * Single CAN device * Supports CAN) Tell extension board2. 0A Specifications* Supports ISO 11898-2 * Up too 1Mbit/s bit rate TEL-CANBUS is utilizing a USB2 interfaceMultiple TEL-CANBUS cards can be installed in a system == Features ==* USB to CANbus through DB-9 Connector.* Implemented using STM32F042C6 MCU=== Software ===* Windows and Linux support** Driverless operation on in Windows and optional ** USB native device for in Linux system.=== Electrical and environmental ===* Isolation per UL1577 (Standard for Optical Isolators)[https://standardscatalog.* Isolated DC 5V UL 1577]
* Transient immunity: 30kV/uS.
* Isolated DC 5V power* Ambient Operation from –40°C to 125°C85°C=== Configuration ===* Selectable Termination 120RTwo Code implementations in one device switchable by a DIP Switch.* Open Source Default [ All design files are available under a permissive licensefw CANable ] USB CDC implementation & [ candleLight] USB device implemintation.* CrossDIP switch for enabling/disabling on-platform board 120 Ohm termination* Upgradeable using build- works on MAC, Linux, in MCU bootloader and windowsopenly available tools.(Please follow update guide in [ GitHub]) === Open source hardware and software ===* Complete hardware design files are available* Complete firmware is available* Designed for Hacking - Easily scriptable using an open[https://python-source Python SW library. ] for easy and cross-platform communication to the device 
== Connection requirements ==
=== Host interface ===USB2=== Physical connection ===* Standart TELL connector.[[TRIP]]or* Optionally USB connector without using a TELL connector.[[USBTT]]
== Version information ==
Latest HW Version Rev 1.0
==Block diagram==
* Add block diagram[[File:TEL-CANBUS_Rev.1.0_block_Diagram.jpg|200px]]
== Mechanical model ==* Add nice looking DB[https://fit-9 TEL-CANBUS Mechanical - DXF]<br>
==Mechanical footprintHardware design files ==* Add 3D model[ TEL-CANBUS Gerber files]<br>* [ TEL-CANBUS Rev 1.0.1 Schematic files]
==Design Software source files==* Add Gerbers * Add Schematics
==Software ToDo add files ==Will update later to Github link after board testing and code clean up<br>* [ Firmware source files on GitHub]