Changes
Created page with "= Description = FT.Q_CAN Is an isolated USB to Controller Area Network (CAN) Tell extension board. = Features = * USB to DB-9 Connector. * Driverless operation on Windows an..."
= Description =
FT.Q_CAN Is an isolated USB to Controller Area Network (CAN) Tell extension board.
= Features =
* USB to DB-9 Connector.
* Driverless operation on Windows and optional USB native device for Linux system.
* Isolation per UL1577 (Standard for Optical Isolators).
* Isolated DC 5V power.
* Transient immunity: 30kV/uS.
* Ambient Operation from –40°C to 125°C.
* Selectable Termination 120R.
* Open Source - All design files are available under a permissive license.
* Cross-platform - works on MAC, Linux, and windows.
* Designed for Hacking - Easily scriptable using an open-source Python library.
== Connection requirements ==
* Standart TELL connector.
* Optionally USB connector without using a TELL connector.
== Version information ==
Latest HW Version Rev 1.0
==Block diagram==
[[File:FT.Q-CAN.jpg|400px]]
* Add nice looking DB-9 Pinout
==Mechanical footprint==
* Add 3D model
==Design files==
* Add Gerbers
* Add Schematics
==Software files ==
Will update later to Github link after board testing and code clean up<br>
https://git-server/kirill/usb2can_stm_sw
FT.Q_CAN Is an isolated USB to Controller Area Network (CAN) Tell extension board.
= Features =
* USB to DB-9 Connector.
* Driverless operation on Windows and optional USB native device for Linux system.
* Isolation per UL1577 (Standard for Optical Isolators).
* Isolated DC 5V power.
* Transient immunity: 30kV/uS.
* Ambient Operation from –40°C to 125°C.
* Selectable Termination 120R.
* Open Source - All design files are available under a permissive license.
* Cross-platform - works on MAC, Linux, and windows.
* Designed for Hacking - Easily scriptable using an open-source Python library.
== Connection requirements ==
* Standart TELL connector.
* Optionally USB connector without using a TELL connector.
== Version information ==
Latest HW Version Rev 1.0
==Block diagram==
[[File:FT.Q-CAN.jpg|400px]]
* Add nice looking DB-9 Pinout
==Mechanical footprint==
* Add 3D model
==Design files==
* Add Gerbers
* Add Schematics
==Software files ==
Will update later to Github link after board testing and code clean up<br>
https://git-server/kirill/usb2can_stm_sw
