Changes

Jump to: navigation, search

Airtop2 - Enable internal graphics display outputs

1 byte added, 07:57, 10 December 2019
* This application note applies to Airtop2 configured with discrete GPU.
* It provides instructions on how to enable the on-board display outputs.
* In the Airtop2 configured with discrete GPU, by default , the primary display setting is set to [Auto], disabling the on-board display outputs.
* In order to be able to use all display outputs, the iGFX needs to be configured as primary.
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.
1,586
edits