Changes

Jump to: navigation, search

Application note - Airtop3 configure PXE boot

2 bytes added, 13:34, 17 November 2019
# In the BIOS menu, browse to '''Advanced''' -> '''Network Stack Configuration''' menu.
# Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear.
# Enable the appropriate functionality. (<u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled''']).
# Press '''F4''' to save and exit.
# Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list.
1,586
edits