Changes
Created page with "==General== ==Hardware== ==Airtop3 is producing audible noise, can I reduce it?== * With the voltage changes, the capacitors vibrate from Piezoelectric forces causing them..."
==General==
==Hardware==
==Airtop3 is producing audible noise, can I reduce it?==
* With the voltage changes, the capacitors vibrate from Piezoelectric forces causing them to make audible noise.
* The main source for this noise are from the power circuits of both the CPU and internal GPU.
*Disabling C-state should reduce noise from the CPU's power circuit:
# Activate development setup items of the setup menu:
## While in splash screen, press F11 (instead of Delete) in the keyboard.
## Go to 'Advanced' tab -> 'Setup items availability' (first item in Advanced tab) -> Choose 'Development'.
## Now a full setup menu is open, including options that can impair the Airtop3 stability or functionality, and items that were not checked or don't work.
# In 'Advanced' tab -> 'Power & Performance' -> 'CPU -Power Management Control' -> 'C states' -> Choose 'Disabled'
# Back to the tabs menu (2x Esc button) -> 'Save & Exit' tab -> 'Save Changes And Exit' -> 'Yes'.
==Software==
==Hardware==
==Airtop3 is producing audible noise, can I reduce it?==
* With the voltage changes, the capacitors vibrate from Piezoelectric forces causing them to make audible noise.
* The main source for this noise are from the power circuits of both the CPU and internal GPU.
*Disabling C-state should reduce noise from the CPU's power circuit:
# Activate development setup items of the setup menu:
## While in splash screen, press F11 (instead of Delete) in the keyboard.
## Go to 'Advanced' tab -> 'Setup items availability' (first item in Advanced tab) -> Choose 'Development'.
## Now a full setup menu is open, including options that can impair the Airtop3 stability or functionality, and items that were not checked or don't work.
# In 'Advanced' tab -> 'Power & Performance' -> 'CPU -Power Management Control' -> 'C states' -> Choose 'Disabled'
# Back to the tabs menu (2x Esc button) -> 'Save & Exit' tab -> 'Save Changes And Exit' -> 'Yes'.
==Software==