Changes
/* FITLET2ERR006: RS-485 half duplex not working on fitlet2 configured with FC-SCG */
* '''Applies to''':fitlet2 configured with FC-SCG Rev1.0
* '''Cause''': In FC-SCG Rev1.0 a signal that controls RX/TX direction is disconnected. As a result RS485 half-duplex does not function.
* '''Workaround''': Full duplex should work well. Covered under warranty, Compualb will replace FC-SCG FACET.None
* '''Fix''': Fix applied to FC-SCG Rev1.1
[[category:fitlet2]]
[[category:errata notes]]
