Changes

Fitlet2 Troubleshooting

251 bytes added, 13:25, 27 March 2019
/* 4. fitlet2 BIOS reset */
</div>
 Reset BIOS default following the following procedurefor [[SBC Product Line: fitlet2-HBPN| SBC revisions 1.1]]):<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;"> #Unplug power cable from the fitlet2#Remove the 4x Phillips Chassis screws#Remove bottom and top cover#Remove the RAM stick #Plug in power cable ('''works should turn on automatically), and Wait ~10 seconds#Unplug power cable#Assemble back the RAM stick#Carefully unplug the RTC Battery from the 2pin connector#Plug power cable (should turn on automatically)#Shutdown the PC#Unplug the power cable#Plug the RTC Battery back in#Plug Power cable At this stage the BIOS settings should be reset to defaults.</div>Reset BIOS default following the following procedure for [[SBC Product Line: fitlet2-HBPN| SBC revisions 1.2]] only):
#Unplug power cable from the fitlet2
9. Plug power cable (should be automatically turned on)
 
* '''If the fitlet2's SBC Revision is 1.1, skip step 9 above and expand the below:'''
<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
carefully unplug the RTC Battery from the 2pin connector.
#Plug power cable (should turn on automatically)
#Continue steps for revision 1.1 (RTC battery had to be disconnected):
##Shutdown the PC
##Unplug the power cable
##Plug the RTC Battery back in
##Plug Power cable
</div>
At this stage the BIOS settings should be reset to defaults.
1,586
edits