Changes

Fitlet2 FACET Cards

4,768 bytes added, 00:03, 16 April 2020
/* Specifications */
* This page provides technical information about [[fitlet2]] FACET-Cards.* FACET-Cards extend [[fitlet2]] functionality and I/O.* FACET-Card stands for '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card -''' (FACET) *This page provides technical information of the [[fitlet2]] compatible FACET cards.-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards*The full production files of each Compulab FACET-Cards extend [[fitlet2]] functionality and I/O.Card are published below to allow 3rd parties to modify for their needs
==Custom FACET-Card design resources==
===WIDE Mechanical constraints===There are two form-factors of FACET-Cards* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)====Narrow FACET-Card mechanical constraints====* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.x_t Narrow FACET-Card envelope (x_t)]* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.DXF Narrow FACET-Card envelope (DXF]* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.pdf Narrow FACET-Card envelope (PDF)] ====Wide FACET-Card mechanical constraints====
* [https://fit-iot.com/files/mechanical/FACETS/FACET-wide-type-envelope.x_t wide FACET-Card envelope (x_t)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.DXF wide FACET-Card envelope (DXF)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)]
===Narrow FACET-Card mechanical constraints===TBD
===FACET-Card pinout===
==FC-PCI==
 
* Type: [[Wide FACET Card]]
* Features:
[[File:fc-pci-top.jpg|200px]]
[[File:fc-pci-bottom.jpg|200px|middle]]
 
===Specifications===
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* Mini PCI connector - usually used for Cell modem module
* Micro-SIM card socket
===Instructions===
===Hardware===
* [[FC-PCI Pinout description table]]
===Schematics ===
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
 
===Component placement===
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1R0_ASSY-CS.pdf FC-PCI placement Component side]
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1R0_ASSY-PS.pdf FC-PCI placement Print side]
===MechanicalProduction files===
*Schematics**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]*Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]*Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]*Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
==FC-CEM==
[[File:FC-CEM-top.jpg|200px]]
[[File:FC-CEM-bottom.jpg|200px|middle]]
 
===Specifications===
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* M.2 Key-B: 2230 - usually used for Cell modem module
* Micro-SIM card socket
===Instructions===
* [[fitlet2 FC-CEM installation instructions]]
===Schematics Production files=== *Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/fcFC-CEM-1_0-cemSchematic.pdf zip FC-CEM SchematicsRev1.0 Schematic files] *Assembly**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
===Component placement===*Mechanical** [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/AssemblyMechanical/FC-CEM-v.1.0DXF FC-AssyCS.pdf FCPCI Mechanical -CEM placement Component sideDXF]<br>** [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/AssemblyMechanical/FC-CEM-v.1.0-AssyPS.pdf PDF FC-CEM placement Print sidePCI Mechanical - PDF]
===Mechanical===
[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
==FC-USB==
[[File:fc-usb-bottom.jpg|200px|middle]]
===Schematics Specifications===* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)* The USB port supports in single transaction translator (TT)* port current limit - Up to 0.5A ===Instructions===* [[fitlet2 FC-USB installation instructions]] ===Production files===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-rev1_1-Schematics.zip FC-USB Rev1.1Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Rev1.1 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.pdf dxf FC-USB SchematicsMech Bottom]**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
===Component placement===
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v1-AssyCS.pdf FC-USB placement Component side]
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v1-AssyPS.pdf FC-USB placement Print side]
===Mechanical===
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
==FC-M2LAN==
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
<br>
 
===Specifications===
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
** Proxy: ECMA-393 and Windows logo for proxy offload
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
** Four Software Definable Pins (SDPs)
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
 
[[File:FC-M2LAN-top.jpg|200px]]
===Instructions===
* [[Fitlet2 FC-M2LAN installation instructions]] ===SchematicsProduction files===*Schematics** [http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-1_0-Schematics.pdf rar FC-M2LAN SchematicsRev1.0 Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
===Component placement===
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyCS.pdf FC-M2LAN placement Component side]
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyPS.pdf FC-M2LAN placement Print side]
===Mechanical===
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
==FC-SCG==
[[File:fc-scg-top.jpg|200px]]
[[File:fc-scg-bottom.jpg|200px|middle]]
 
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
 
===Hardware===
* [[FSCG RS232/RS485 pinout table]]
===Application notes===
Note: GPIO and CANbus cannot work simultaneously
===Schematics Production files===* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-Schematics.pdf FC-SCG Schematics]
===Component placement===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/AssemblySchematics/FC-SCG-rev11_0-AssyCSSchematics.pdf zip FC-SCG placement Component side]* [https://fit-iotRev1.com/0 Schematic files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyPS.pdf FC-SCG placement Print side]
===*Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files] Mechanical===** [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]** [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
==FC-POED==
* Type: [[Wide FACET Card]]
* Features:
** 802.3af /802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
** M.2 E-Key socket (usually used for Wi-Fi)
** M.2 M-Key socket 2260 | 2280 for SATA SSD
[[File:fc-poed-top-front.jpg|200px]]
[[File:fc-poed-bottom-front.jpg|200px|middle]]
 
===Specifications===
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
** Proxy: ECMA-393 and Windows logo for proxy offload
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
** Four Software Definable Pins (SDPs)
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
* Inrush current limit (200-mA) during startup
* Enhanced features includes automatic Maintain Power Signature (MPS)
===Instructions===
* [[fitlet2 FC-POED installation instructions]]
===Schematics Production files===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POEPOED-1_1-Schematics.pdf rar FC-POED SchematicsRev1.0 Schematic files]
===Component placement===*Assembly** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1POED-AssyCS1_0Assembly.pdf zip FC-POED placement Component side]* [https://fit-iotRev1.com/0 Assembly files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyPS.pdf FC-POED placement Print side]
===*Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files] *Mechanical===** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
==FC-OPLN==
[[File:fc-opln-top.jpg|200px]]
===Schematics Specifications===* Supported 1Gbps SFP/SFP+ transceiver* LEDs: LAN SFP link/activity indication: ** Right (DS1) green LED: ON - Link, Blink - Link and activity** Left (DS2) green LED: ON - 100 Mbps link** Left (DS2) orange LED: ON - 1000 Mbps link. * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)** M.2 Key-E: 2230 (usually used for WiFi & BT module)* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)** PCIe interface: PCIe v2.1 (2.5 GT/s) x1** Integrated Non-Volatile Memory** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)*** Proxy: ECMA-393 and Windows logo for proxy offload** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization*** IEEE 802.1Qav traffic shaper (with software extensions)** Jumbo frames** Interrupt moderation, VLAN support, IP checksum offload** RSS and MSI-X to lower CPU utilization in multi-core systems** Advanced cable diagnostics, auto MDI-X** ECC – error correcting memory in packet buffers ===Instructions===* [[Fitlet2 FC-OPLN installation instructions]] ===Production files===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.pdf zip FC-OPLN SchematicsRev1.0 Schematic files] *Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files] *Layout**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files] *Mechanical**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
===Component placement===
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyCS.pdf FC-OPLN Placement Component side]
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyPS.pdf FC-OPLN Placement Print side]
===Mechanical===
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
[[category:fitlet2]]
[[category:Extension boards]]