[https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates]
<!--
== BIOS update procedure ==
# Execute me_up.nsh script
# On next boot, reset BIOS Setup settings to defaults by F9 in BIOS Setup Menu.
-->
===Step-By-Step Bios Update===
<!--*<span style="color: red">To update from old If the machine has an older BIOS version than '''CR_2.2.0.377 X64''' to recent Please contact Compulab'''IPC_2s support at <u>fitpcsupport@compulab.2co.400.5'''+ BIOS versions, please expand and follow the below procedure:il</u></span> -->==Step-By-Step Bios Update==
===Prepare Boot Media===
1. Download BIOS file the latest [[Intense PC BIOS ROM update image: [https://fit-iot.com/files/download/ipc3/bios/Update-for-old-BIOS/ipc_2.2.400.5.img IPC_2.2.400.5 old BIOS update]]<br>
2. Extract the image file from the archive.<br>
3. Prepare bootable USB flash drive:
sudo dd if=filename.img of=/dev/sdx bs=1MB
===1st boot===
1. Boot Intense PC or MintBox2 from the USB Flash drive.<br>
BIOS.bat
NOTE: On older versions the name of the batch file is - '''BIOS_UPD.bat'''
* The following warnings can be ignored: [[File:BIOS_error_IPC.png|none|thumb|left|]]
4. Reboot the device manually after you see the message "Verifying flash... VERIFIED".
===2nd boot===
1. Boot Intense PC or MintBox2 from the USB Flash drive.<br>
# Wait until message "Please disconnect this system from power for 15 sec for completion"
# Power cycle the computer.
</div>--><!--
== Previous BIOS update procedure ==