Changes
# On next boot, reset BIOS Setup settings to defaults by F9 in BIOS Setup Menu.
<span style="background:red"> To update from old BIOS version CR_2.2.0.377 X64 please expand and follow the below procedure:</span>
<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
==Step-By-Step Bios Update==
Upgrade: from CR_2.2.0.377 X64 to IPC_2.2.400.5 X64.
===Prepare Boot Media===
1. Download BIOS file Intense PC BIOS ROM update image: [https://fit-iot.com/files/download/ipc3/bios/Update-for-old-BIOS/ipc_2.2.400.5.img IPC_2.2.400.5 old BIOS update]
2. Extract the image file from the archive.
3. Prepare bootable USB flash drive:
* In Windows use '''Win32DiskImager''' tool<br>
* In Linux do the following:
In order to figure out what the USB device name is, issue:
ls -all /dev/disk/by-id/
For instance, the device detected as '''/dev/sdx''', issue:
sudo dd if=filename.img of=/dev/sdx bs=1MB
==1st boot==
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
BIOS.bat
* This message is a warning and must be ignored: [[File:BIOS_error_IPC.png|none|thumb|left|]]
**Wait for it's completion without errors.
*Reboot the device manually after the update process prints out a message "After it the system will boot again into FreeDOS".
===2nd boot===
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
ME_LOCK.bat
3. Wait for it's completion without errors.
4. Wait until message "Please disconnect this system from power for 15 sec for completion"
5. Power cycle the computer.
</div>
===Old BIOS versions update procedure===
<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
