Changes

Jump to: navigation, search

Fitlet2 Troubleshooting

36 bytes added, 11:53, 12 July 2018
/* 4. fitlet2 BIOS reset */
#Assemble back the DIMM stick
#Check which revision the fitlet2 SBC is – should be on the print side, should be printed on top of the board (where the DIMM is located)
#'''If the fitlet2 SBC Revision is 1.2 ''' --> Press the RTC reset button near ##Otherwise '''if the fitlet2 SBC Revision is 1.1 ''' --> carefully unplug the RTC Battery from the 2pin connector.
#Plug power cable (should turn on automatically)
#Continue steps for revision 1.1 (RTC battery had to be disconnected):
1,586
edits