Changes
* fit-statUSB provides status indication by changing the LED color, brightness and color cycle.
* fit-statUSB identifies to the PC as a serial device and changes the LED color by text commands received over the serial port.
== Using fit-statUSB in Windows ==
=== From command line ===
echo [command] > \\.\[com port]
* [command] - the command sent to fit-statUSB over serial
* [com port] - the COM port assigned to fit-statUSB
'''Example:'''
Assuming fit-statUSB is on COM10 the following command will set fit-statUSB color to red:
echo #FF0000 > \\.\COM10
=== Detect COM port of fit-statUSB ===
Use mode command
mode
You will receive a list of COM ports. fit-statUSB listing on COM10 looks like that:
Status for device COM10:
------------------------
Baud: 9600
Parity: None
Data Bits: 8
Stop Bits: 1
Timeout: ON
XON/XOFF: OFF
CTS handshaking: OFF
DSR handshaking: OFF
DSR sensitivity: OFF
DTR circuit: OFF
RTS circuit: OFF