Changes

Jump to: navigation, search

Airtop2 Troubleshooting

25 bytes removed, 15:10, 14 March 2018
===I can't turn on the computer, it doesn't wake up?===
# '''==Airtop2 BIOS reset:'''==## *Power down the PC and unplug the power cable.## *Open the service door.## *Remove the disks cartridge.## *Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).## *Mount the disks cartridge and close the door.## *Plug the power and power up the PC (either auto-on or pressing power button). 
[[File:Airtop2-bios-reset.gif]]
# '''==Check memory (RAM)'''==*Verify RAM modules are installed. The system will not boot without it.
# '''==Check storage (HDD/SSD):'''==*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
# '''==Check power supply (PSU):'''==
*Verify the power supply is not damaged and functions properly.
*If you have another power supply use it to eliminate and determine the failing side.
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
1,586
edits