Changes

Jump to: navigation, search

Airtop2 Troubleshooting

10 bytes added, 15:06, 14 March 2018
===I can't turn on the computer, it doesn't wake up?===
==1. # '''Airtop2 BIOS reset:=='''## Power down the PC and unplug the power cable.## Open the service door.## Remove the disks cartridge.## Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).## Mount the disks cartridge and close the door.## Plug the power and power up the PC (either auto-on or pressing power button).
[[File:Airtop2-bios-reset.gif]]
==2. # '''Check memory (RAM)=='''
Verify RAM modules are installed. The system will not boot without it.
==3. # '''Check storage (HDD/SSD):=='''
Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
==4. # '''Check power supply (PSU):=='''
*Verify the power supply is not damaged and functions properly.
*If you have another power supply use it to eliminate and determine the failing side.
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
1,586
edits