Changes

Jump to: navigation, search

Intense PC (MintBox 2) security update 170523

1 byte removed, 13:53, 20 June 2017
#* Windows users - use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]
#* Linux users:
#** Run this command to figure out what device name was assigned to your the USB drive: $ ls -all /dev/disk/by-id/
#** Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=''filename.img'' of=/dev/sdx bs=1MB
# Boot Intense PC or MintBox2 from the USB Flash drive.
1,916
edits