Jump to: navigation, search

Fitlet: BIOS Update

699 bytes removed, 13:32, 15 December 2015
# Copy the flt.rom file to the root directory on the USB Flash Drive.
== Preparing a bootable USB flash device on a Windows PC ==
# Download and install [ Image Writer for Windows]. You can use any other application that flashes image to the USB flash device. For example: [ Passmark ImageUSB].
# Download and extract [ Bios Updater image].
# Connect the USB flash device to your host PC (ensure that you don't have any other USB storage devices connected).
# Run Win32DiskImager.
# Select the target disk in the Device drop-box.
# Select the extracted BIOS_Updater.img in the Image File search-box.
# Press Write button to proceed.
# Wait until completion.
# Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
# Download the latest '''[[fitlet: BIOS ROM Files|BIOS binary file]]'''.
# Copy the bios-flt.rom file to the root directory on the USB flash device.
== Updating BIOS ==
# Connect the prepared USB flash device to the fitlet and boot (it should be connected to the USB2 connector only). # Press the DEL key during boot to enter BIOS setup utilitymenu.# Set 1st boot priority to USB Key.Under Save & Exit tab, select the option “Launch EFI Shell from filesystem device”# Save When the system enters the UEFI mode, type the command “flash flt” and exitpress Enter.# The fitlet should boot to DOS from the USB flash deviceBIOS flashing process will start.# Type flash:'''Note:''' At the start of the process, the system will hang for 1 minute. This is expected behavior. Please, don’t interrupt it.bat# Wait until completionWhen the process ends, type the command “reset” and press Enter.# Disconnect Press the USB flash device DEL key during the restart and rebootenter the BIOS menu.# Under Save & Exit tab, select the option “Restore Defaults” and after that “Save Changes and Reset”.
=== Links ===