Changes
/* Hardware Specifications */
The following section provides information about FM-EBP main components and features.
'''Bypass Scenarios'''
[[File:FM-EBP_application.png]]
'''Intel I211AT GbE Controller'''
Intel Ethernet I211 controller is a single port, compact, low power component that supports GbE designs. The I211 offers a fully-integrated GbE Media Access Control (MAC), Physical Layer (PHY) port and supports PCI Express 2.1 (5GT/s). The I211 enables 1000BASE-T implementations using an integrated PHY. It can be used for server system configurations such as rack mounted or pedestal servers, in an add-on NIC or LAN on Motherboard (LOM) design. Another possible system configuration is for blade servers as a LOM or mezzanine card. It can also be used in embedded applications such as switch add-on cards and network appliances.
One independent interface is used to connect the I211 port to external devices. The following protocol is supported: MDI (copper) support for standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab).
'''Main Features'''
* PCIe v2.1 (5 GT/s) x1, with Switching Voltage Regulator (iSVR)
* Integrated Non-Volatile Memory (iNVM)
* Platform Power Efficiency
* IEEE 802.3az Energy Efficient Ethernet (EEE)
* Proxy: ECMA-393 and Windows logo for proxy offload
* Jumbo frames
* Interrupt moderation, VLAN support, IP checksum offload
* RSS and MSI-X to lower CPU utilization in multi-core systems
* Advanced cable diagnostics, auto MDI-X
* ECC – error correcting memory in packet buffers
* Four Software Definable Pins (SDPs)
